Contact +39 0322 93574 ITA ENG

Receiver HML-24

  1. Home
  3. Receiver RX
  4. Receiver HML-24
HML-24

The receiver is equipped with pull-out terminals for an easy connection to any system. The installation can be done by 4 corner brackets. A green and red LED warns the state receiving transmission between transmitter and receiver unit by signaling via pulse code.

Dimensions

Dimensions

The HML series receiver is the biggest size unit. After that it has been designed to minimize the aesthetic impact on the on-board system.

Receiver Antenna

Receiver Antenna

The receiving antennas can be easily screwed onto the SMA type connector. This particular makes it easier to move it to a different location. OPTIONAL  It's possible to mount an external antenna with 2 or 5 meters cable, in this way you can install the antenna in a better reception place allowing the receiver positioning even inside an electrical panels or metal structures.


Frequency 434.040 > 434.790 MHz
Modulation 4GFSK
Sensitivity -112dBm a 1.2Kbps
Control System PLL
Safety Performance of the STOP
function (EN ISO 13849-1)		 Pl d
Antenna Impedance 50 Ohm
Command Response Time 50 > 100mS
Power Supply 24/48Vac/dc
OPTIONAL: 12 Vdc
Power Consumption AC:10,4W / DC:22,4W
Antenna External
Standby Current Consumption 1,13W
Operating and Storage Temperature (-20°C)~(+55°C) / (-40°C)~(+65°C)
(-4°F)~(+131°F) / (-40°F)~(+149°F)
Connecting Interfaces Multi-core cable
Relay 2 Start + 2 Stop + max. 20 function (1 NO 5A 250Vca)
Protection Degree IP65
Dimensions H260 x L272 x P96 mm
Weight 2950g
Housing Material PA6(30% GF)